1. MM-metal SS-steelceramic
MM-metal SS-steelceramic is the PolymerMetal with the widest range of application for repairs and maintenance of all metals and alloys. MM-metal SS-steelceramic offers a very high quality at mechanical repairs of damaged devices (i.e. caused by crack,
corrosion, abrasion, impact or chemical stress). Machinability: SiC-grinding plates, Diamond tools
2. MM-metal SQ
Characteristic for this PolymerMetal are the extreme short curing time and the easy processing. The variable mixing ratio offers application consistencies from pasty to liquid. MM-metal SQ can be used at ambient temperatures up to minus 30° C.
3. MM-metal SS-steel 382
MM-metal SS-steel 382 is a PolymerMetal and construction material, that is suitable for application to all kinds of metals and alloy. The high performance material MM-metal SS-steel 382 delivers the best technical data under mechanical and physical stress.
4. MM-metal SS
PolymerMetals of the SS-basis possess very high-quality standards for the reconstitution of metallic devices. These PolymerMetals are available with the alloy materials steel, aluminium, copper and bronze.
5. MM-metal oL-steelceramic
MM-metal oL-steelceramic is a PolymerMetal tested and certified for the repair of oily, greasy or fuel contaminated metals and alloys in case of stress due to cracks, corrosion, abrasion, impact or chemicals and any level of contamination. MM-metal oL-steelceramic
can also be used to seal oil,grease or fuel pouring from leaks at systems under pressure, and without needing to clean the damaged area from oil beforehand.
6. MM-metal UW
MM-metal UW is a PolymerMetal with extreme short curing time (3 minutes). It is certified for repairs under water or on wet metal surfaces. Possible application areas of MM-metal UW are the repair of under water components or the sealing of leaks without
needing to dry the area before application. MM-metal UW can also be used to seal water pouring from leaks at systems under pressure.
7. Ceramium®
Ceramium® offers maximum wear resistance against continuous material loss on metallic surfaces. With viscoushardened layers, Ceramium® protects against erosion, abrasion, cavitation or corrosion in case of dry or wet or chemical stress.
8. Ceramium® CH
Ceramium® CH is a wear resistant and high chemical resistant PolymerCeramic. Possible applications of this material are protective coatings and linings against a plurality of aggressive chemicals.
9. XETEX® BD
XETEX® BD is a cold-setting two-component construction adhesive on basis of epoxy resin/ ceramic, which has been developed for high-strength bonding. The application is the joining of materials (i.e. metals, ceramics and plastics) with very high strength
at high mechanical, static and dynamic loads.
10. VP 10-017
VP 10-017 is a viscoplastic polymer-ceramic with high impact and cavitation resistance. This extremely smooth surface protection provides very high resistance against chemicals and has a high mechanical-physical load capacity.
11. VP 10-500
VP 10-500 is a PolymerMetal for repair and maintenance of metals in the high temperature range. It is a hot hardening material which does have a clearly higher temperature resistance than cold-hardening polymer materials. A high chemical resistance especially
against sulphuric acid is given. Machinability: SiC-grinding plates, Diamond tools
12. Molymetall®
Molymetall® is a PolymerMetal with a very low coefficient of friction and self-lubricating properties. The emergency running properties against solid dry friction such as sliding wear and stick-slip are excellent. After curing, Molymetall® can be processed
to a finished measure up to the µ-area. Machinability: standard tools
13. Sealium®
Mostly Sealium is used as sealant and sealing of metallic casting materials. Furthermore, alloys and thermal coated components can be treated with Sealium®. As a one component material with extremely high capillary activity, Sealium penetrates micro-porosities
or hairline cracks and reacts in the structure of the metallic material.
14. MM-metal S
With its rapid hardening, i.e. quick repairs and the removal of bubbles in cast parts are possible applications. Application consistencies from liquid to pasty are obtained by altering the mixing ratio of metal powder and hardener. PolymerMetals of the
S-basis are available in steel, iron, aluminum, copper and bronze. Machinability: standard tools
15. MM-Elastomer
MM-Elastomer is a material with rubber-like characteristics. Using MM-Elastomer elastic connections can be created or components repaired which are i.e. subject to abrasion. The range of MM-Elastomer goes from Shore A hardness 40 to 95.
